Skyjack is a leading manufacturer of aerial work platforms in the world and is known for its exceptional quality and reliability. Skyjack products include boom lifts, scissor lifts, mast lifts and telehandlers that are used to position individuals. Users who are getting ready to operate their Skyjack lifts should first become acquainted with the company’s recommended safety guidelines and operational procedures before employing the equipment. Mistreatment of these machines can result in an accident or damage that could prove to be fatal to the operator and everyone around.
Skyjack lifts operate at an optimal level when made use of on level ground. Before one operates the lift over any given terrain, they must make sure that there is no loose debris on the ground. It is recommended to avoid holes or steep slopes in order to reduce the risk of the equipment tipping over and knocking the operator off his perch. Other workers near or around the equipment should always keep the general area of the scissor lift clear when it is in use in order to avoid getting run over by the vehicle.
Before making use of a skyjack lift, the operator should carry out a thorough inspection of the equipment and its important components. A test run while the machine is retracted will give the operator the opportunity to check and verify whether or not the equipment is working properly before they go ahead with their duties. Tires are an indispensable component of a skyjack lift since they not only provide the device with a strong foundation but also make the lift easily transportable. Therefore, a worn out tire or a damaged one could blow and cause an accident.
Skyjack lift operators should familiarize themselves with other safety measures that need to be kept in mind in order to reduce the risk of injury. Majority of skyjack lifts are equipped with safety chains that need to be in place when the equipment is not in use. This would avoid a disaster that was to occur if the lift was accidentally turned on. One last thing to bear in mind is that skyjack lifts must not be overextended to such an extent that it may come into contact with the ceiling or light fixtures of a building.